Liberty 3 Pro | Wireless Noise Cancelling Earbuds
Sold Out
Liberty 3 Pro | Wireless Noise Cancelling Earbuds

FAQ

  • Presenting ACAA 2.0, the latest version of our revolutionary audio technology.
    Please select your ear tips and start listening.

    01

    Select ear tips and ear wings in a suitable size for your ears

    02

    Hold the buds in this position

    03

    Put buds in your ears at this angle

    04

    Twist to lock into place

  • How do I wear Liberty 3 Pro?
    1) Liberty 3 Pro comes with 4 sizes of ear wings and ear tips. The sizes are: XS(0), S(1), M(2), L(3), and the earbuds come with M(2) ear wings already attached.
    2) Select and install the ear tips before using for the first time. We recommend starting with size M(2).
    3) Put Liberty 3 Pro in your ears and twist to lock into place. Make sure the ear wings are wedged into the ridge of your ear.
    4) Try on different sizes of ear tips and ear wings until you find a combination which delivers a tight seal and snug fit. You may want to use different sizes of ear tips and ear wings in your left and right ears.
    5) If you're still not sure about the fit, take the Fit Test in the soundcore app.
  • Can I use Liberty 3 Pro without ear wings?
    We recommend using ear wings to get the best support and most stable fit. Try using the XS(0) size if the other sizes are all too large.
  • What is the black oval on Liberty 3 Pro's earbuds?
    They are the IR-sensors which sense if the earbuds are currently being worn. If the ear wings are installed incorrectly, the sensor will be covered and it will affect the accuracy of wearing detection. Make sure the ear wings are installed correctly and the surface of the IR-sensors is kept clean.
  • How does the automatic play/pause feature work?
    - Remove one bud to auto pause your media, replace the bud to resume playback.
    - Remove two buds to stop your media, and resume playback on your phone manually.
    - Auto play/pause may not be compatible with some 3rd party apps.
    - You can use the soundcore app to disable the auto play/pause feature.
  • How do I power the earbuds on and off?
    Power on:
    - The earbuds will turn on automatically when you open the charging case.
    - Or long press the touch pad to turn on the earbuds.
    Power off:
    - Put the earbuds back into the charging case and close the cover to turn off the earbuds.
    - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)
    - When you are wearing the earbuds, they will only turn off when the battery runs out.
  • Can I use the left/right earbud on its own?
    Yes, just take one earbud out from the charging case to use.
    If you are using two earbuds, you can put the earbud you don't want to use in the charging case and continue using the other one on its own.
    Note: If you are wearing two earbuds, listening in ANC mode, and you return one earbud to the charging case, ANC will switch to Normal mode automatically because it is not supported. If you wear the second earbud, Normal mode will switch back to ANC automatically.
  • How do I clean Liberty 3 Pro?
    - To clean the contact pins on both the earbuds and charging case, unplug the charging case from the power, use a cotton swab or cloth dipped in rubbing alcohol, or an alcohol wipe.
    - To clean the filter of the earbuds, remove the ear tips first and use a cotton swab dipped in rubbing alcohol to clean.
  • How can I adjust Liberty 3 Pro's volume via the earbuds?
    1) Go to the Apple App Store or Google Play to download the soundcore app.
    2) Pair your device with Liberty 3 Pro.
    3) Open the soundcore app to connect with Liberty 3 Pro.
    4) Select "Controls".
    5) Customize the controls according to your preferences.
    Note: Customized controls are not available when using a single earbud.
  • What do the LED indicators inside the case mean?
    Pulsing White: The earbuds are connected via Bluetooth and the pins are connected with the charging case.
    Flashing White: The earbuds are in pairing mode.
    Rapid Flash 3 Times: The earbuds are resetting.
    No Light: The earbuds have not connected correctly with the charging case, or the case has run out of battery.
  • How do I switch between ANC and Transparency modes?
    Long press the left/right earbud to switch between ANC and Transparency modes.
    To customize any touch control, download the soundcore app and go to "Controls".
  • How do I set up HearID ANC?
    Take the HearID ANC test in the app. It needs to be conducted in a noisy environment to ensure the best results.
    Tips:
    - Do not play music while taking the test as it will affect the accuracy of the result.
    - Do not swallow or talk during the test.
    - External noises need to of a stable level because large fluctuations in noise will affect the accuracy of the results.
  • How do I trigger my phone's voice assistant via Liberty 3 Pro?
    Go to "Controls" in the soundcore app, and choose a custom command for voice assistants.
  • What should I do if I have any problems using the touch controls?
    1) Make sure you are wearing the earbuds correctly.
    2) Try single press, double press, long-press, etc. to see if any of the commands work.
    3) Reset the earbuds. See "How do I reset Liberty 3 Pro ?" under the Bluetooth tab.
  • How should I look after Liberty 3 Pro?
    1) Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Liberty 3 Pro at least once a month.
    2) Charge the earbuds after you use them. In order to improve the battery's lifespan, do not always wait until there's 20% power remaining or less to charge them.
    3) If you are storing the charging case, make sure there are at least 2 lights lit up on the case to ensure there is enough power.
    4) Open the charging case's lid at least once a month to ensure the earbuds start charging.
    5) Regularly clean the charging pins on the earbuds and charging case.
    6) Keep the ear tips clean.
    7) If it comes into contact with liquid, use a hairdryer on the 'cool' setting to dry the case.
  • How do I enable multipoint connection on Liberty 3 Pro?
    Open the charging case lid so the earbuds enter pairing mode. Pair the earbuds with the first device, wear the earbuds, and then use one of the following methods to pair the second device:
    Method 1: Long press both touch pads for 5 seconds until you hear a tone to indicate the earbuds are in pairing mode. Search for soundcore Liberty 3 Pro in the second device's Bluetooth menu and pair.
    Method 2: Use the Bluetooth manager in the soundcore app to pair a second device or connect to paired device. Notes:
    1) To switch between media, you should stop the playing media on the first device, then start playing on the second.
    2) The media you're currently listening to will automatically stop when an incoming call is detected. 3) You can turn off the multipoint connection via the soundcore app.
    4) LDAC mode is disabled when using multipoint connection because of the Bluetooth transmission limit.
  • How do I reset Liberty 3 Pro?
    1) Place the earbuds in the charging case and leave the cover open.
    2) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly. When the LEDs start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
  • What should I do if any of the following problems occur? 1. Only one earbud has sound. 2. One side does not pair with the other side or my device. 3. No music plays after connecting with my device. 4. Cannot pair or reconnect with my device.
    Put the earbuds into the charging case and close for 10 seconds. Then open the case to try pairing again.
    If that doesn't work, try the following:
    1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.
    2) Place the earbuds in the charging case and leave the cover open.
    3) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly.
    When they start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
    4) Turn off your device's Bluetooth and turn it on again to pair with soundcore Liberty 3 Pro.
  • What should I do if Liberty 3 Pro disconnects or the sound is choppy?
    Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:
    1) Ensure your phone is on the right hand side of your body.
    2) Download videos and songs instead of streaming.
    3) If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.
    Or you can try:
    - Resetting the earbuds. See "How do I reset Liberty 3 Pro ?"
    - Try a different device if possible.
  • What should I do if any of the following problems occur? 1) The earbuds don’t recharge in the charging case. 2) The earbuds keep connecting to the device even after being put back in the charging case with the cover closed. 3) The earbuds don't turn on when taken out of the charging case.
    1) Confirm the charging case has power left (press the button on the case and see if a LED is illuminated).
    2) Clean the charging pins with a dry cloth and an alcohol-based disinfectant to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case correctly. When you put the earbuds back into the charging case, the lights inside the case will flash to indicate both earbuds are charging normally.
    3) Please make sure the earwings are installed well(Align the oval hole on the ear wing with the wearing detection sensor on the earbud.) so they didn't affect the charging.
    4) If they still do not turn on, put the earbuds back into the charging case and close the case for 6 seconds, and then open the case again.
  • How long does it take to fully charge the earbuds?
    About 2 hours.
  • How long does it take to fully charge the charging case?
    About 4 hours by wireless charger and about 3 hours by USB-C cable.
  • What is Liberty 3 Pro's playtime from a single charge/with the charging case?
    Normal Mode: Up to 8 hours on a single charge/32 hours with the charging case.
    Noise Cancelling Mode: Up to 6 hours on a single charge/24 hours with charging case.
    Transparency Mode: Up to 6 hours on a single charge/24 hours with charging case.
    Call: Up to 4.5 hours on a single charge/18 hours with charging case.
    Data based on internal lab testing. Results may vary under different conditions.
  • Does the case support wireless charging?
    Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned. If it starts charging you will see the LEDs blinking.
  • What audio codecs do Liberty 3 Pro support?
    SBC, AAC, and LDAC.
  • How do I enable LDAC?
    1) Download and update your soundcore app to latest version.
    2. Change the Sound Mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC-compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.
  • How do I enable 3D Surround Sound?
    Use the soundcore app to activate 3D Surround Sound. Go to the "Sound Mode" section to switch to 3D Surround Sound.
    Note: 3D Surround Sound processes audio data in real time, increasing the power consumption and decreasing the overall playtime.
  • What should I do if Liberty 3 Pro's noise cancellation performance does not meet my expectations?
    Here are some tips for enhancing the sound quality and noise cancellation:
    1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.
    2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.
    3) Take the HearID ANC test to personalize the noise cancelling effect.
    Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
    4) Try different ANC modes to see which one suits your environment best.
  • What should I do if I encounter wind noise while outdoors?
    Use Wind Reduction mode, which can be found in the ANC section of the soundcore app. Wind Reduction mode is ideal for environments with constantly high levels of wind, such as cycling, workouts or other outdoor activities. When using this mode, the earbuds will detect wind noise automatically and when it reaches the threshold, Wind Reduction mode starts to work.
  • Firmware version x.82
    Performance improvements:
    -Improved stability of the Bluetooth connection
    Release Date: 05/07/2022
  • Firmware Version 3.71
    Added ANC/Transparency in Mono mode (requires soundcore App version 2.8.6 or higher to use).
    Release Date: 12/08/2021
  • Firmware version x.69
    Performance improvements and bug fixes:
    - Improved usability of touch controls
    - AAC/SBC codec audio lag has been reduced
    - Improved stability of LDAC mode when playing music
    Release Date: 11/20/2021
  • Firmware version x.58
    Performance improvements
    - Improved transparency
    - Improved call quality for loud, noisy environments
    - Improved power management
    Release Date: 11/04/2021
  • Are there any tips for upgrading Liberty 3 Pro's firmware?
    - Keep the earbuds in the charging case and ensure the cover is open.
    - Make sure the earbuds have enough power (over 20%).
    - Do not use the earbuds during the whole process.
    - Try again if it fails.
  • Manual

    A3952 - manual

    2021-3-30

  • QSG

    A3952 - QSG

    2022-3-30

  • Declaration of Conformity

    A3952-DOC

    2022-10-26

    • Presenting ACAA 2.0, the latest version of our revolutionary audio technology.
      Please select your ear tips and start listening.

      01

      Select ear tips and ear wings in a suitable size for your ears

      02

      Hold the buds in this position

      03

      Put buds in your ears at this angle

      04

      Twist to lock into place

    • How do I wear Liberty 3 Pro?
      1) Liberty 3 Pro comes with 4 sizes of ear wings and ear tips. The sizes are: XS(0), S(1), M(2), L(3), and the earbuds come with M(2) ear wings already attached.

      2) Select and install the ear tips before using for the first time. We recommend starting with size M(2).

      3) Put Liberty 3 Pro in your ears and twist to lock into place. Make sure the ear wings are wedged into the ridge of your ear.

      4) Try on different sizes of ear tips and ear wings until you find a combination which delivers a tight seal and snug fit. You may want to use different sizes of ear tips and ear wings in your left and right ears.

      5) If you're still not sure about the fit, take the Fit Test in the soundcore app.
    • Can I use Liberty 3 Pro without ear wings?
      We recommend using ear wings to get the best support and most stable fit. Try using the XS(0) size if the other sizes are all too large.
    • What is the black oval on Liberty 3 Pro's earbuds?
      They are the IR-sensors which sense if the earbuds are currently being worn. If the ear wings are installed incorrectly, the sensor will be covered and it will affect the accuracy of wearing detection. Make sure the ear wings are installed correctly and the surface of the IR-sensors is kept clean.
    • How does the automatic play/pause feature work?
      - Remove one bud to auto pause your media, replace the bud to resume playback.

      - Remove two buds to stop your media, and resume playback on your phone manually.

      - Auto play/pause may not be compatible with some 3rd party apps.

      - You can use the soundcore app to disable the auto play/pause feature.
    • How do I power the earbuds on and off?
      Power on:

      - The earbuds will turn on automatically when you open the charging case.

      - Or long press the touch pad to turn on the earbuds.

      Power off:

      - Put the earbuds back into the charging case and close the cover to turn off the earbuds.

      - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)

      - When you are wearing the earbuds, they will only turn off when the battery runs out.
    • Can I use the left/right earbud on its own?
      Yes, just take one earbud out from the charging case to use.

      If you are using two earbuds, you can put the earbud you don't want to use in the charging case and continue using the other one on its own.


      Note: If you are wearing two earbuds, listening in ANC mode, and you return one earbud to the charging case, ANC will switch to Normal mode automatically because it is not supported. If you wear the second earbud, Normal mode will switch back to ANC automatically.
    • How do I clean Liberty 3 Pro?
      - To clean the contact pins on both the earbuds and charging case, unplug the charging case from the power, use a cotton swab or cloth dipped in rubbing alcohol, or an alcohol wipe.

      - To clean the filter of the earbuds, remove the ear tips first and use a cotton swab dipped in rubbing alcohol to clean.
    • How can I adjust Liberty 3 Pro's volume via the earbuds?
      1) Go to the Apple App Store or Google Play to download the soundcore app.

      2) Pair your device with Liberty 3 Pro.

      3) Open the soundcore app to connect with Liberty 3 Pro.

      4) Select "Controls".

      5) Customize the controls according to your preferences.


      Note: Customized controls are not available when using a single earbud.
    • What do the LED indicators inside the case mean?
      Pulsing White: The earbuds are connected via Bluetooth and the pins are connected with the charging case.

      Flashing White: The earbuds are in pairing mode.

      Rapid Flash 3 Times: The earbuds are resetting.

      No Light: The earbuds have not connected correctly with the charging case, or the case has run out of battery.
    • How do I switch between ANC and Transparency modes?
      Long press the left/right earbud to switch between ANC and Transparency modes.

      To customize any touch control, download the soundcore app and go to "Controls".
    • How do I set up HearID ANC?
      Take the HearID ANC test in the app. It needs to be conducted in a noisy environment to ensure the best results.

      Tips:

      - Do not play music while taking the test as it will affect the accuracy of the result.

      - Do not swallow or talk during the test.

      - External noises need to of a stable level because large fluctuations in noise will affect the accuracy of the results.
    • How do I trigger my phone's voice assistant via Liberty 3 Pro?
      Go to "Controls" in the soundcore app, and choose a custom command for voice assistants.
    • What should I do if I have any problems using the touch controls?
      1) Make sure you are wearing the earbuds correctly.

      2) Try single press, double press, long-press, etc. to see if any of the commands work.

      3) Reset the earbuds. See "How do I reset Liberty 3 Pro ?" under the Bluetooth tab.
    • How should I look after Liberty 3 Pro?
      1) Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Liberty 3 Pro at least once a month.

      2) Charge the earbuds after you use them. In order to improve the battery's lifespan, do not always wait until there's 20% power remaining or less to charge them.

      3) If you are storing the charging case, make sure there are at least 2 lights lit up on the case to ensure there is enough power.

      4) Open the charging case's lid at least once a month to ensure the earbuds start charging.

      5) Regularly clean the charging pins on the earbuds and charging case.

      6) Keep the ear tips clean.

      7) If it comes into contact with liquid, use a hairdryer on the 'cool' setting to dry the case.
    • How do I enable multipoint connection on Liberty 3 Pro?
      Open the charging case lid so the earbuds enter pairing mode. Pair the earbuds with the first device, wear the earbuds, and then use one of the following methods to pair the second device:

      Method 1: Long press both touch pads for 5 seconds until you hear a tone to indicate the earbuds are in pairing mode. Search for soundcore Liberty 3 Pro in the second device's Bluetooth menu and pair.

      Method 2: Use the Bluetooth manager in the soundcore app to pair a second device or connect to paired device.

      Notes:

      1) To switch between media, you should stop the playing media on the first device, then start playing on the second.

      2) The media you're currently listening to will automatically stop when an incoming call is detected.
      3) You can turn off the multipoint connection via the soundcore app.

      4) LDAC mode is disabled when using multipoint connection because of the Bluetooth transmission limit.
    • How do I reset Liberty 3 Pro?
      1) Place the earbuds in the charging case and leave the cover open.

      2) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly. When the LEDs start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
    • What should I do if any of the following problems occur? 1. Only one earbud has sound. 2. One side does not pair with the other side or my device. 3. No music plays after connecting with my device. 4. Cannot pair or reconnect with my device.
      Put the earbuds into the charging case and close for 10 seconds. Then open the case to try pairing again.


      If that doesn't work, try the following:

      1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.

      2) Place the earbuds in the charging case and leave the cover open.

      3) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly.
      When they start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.

      4) Turn off your device's Bluetooth and turn it on again to pair with soundcore Liberty 3 Pro.
    • What should I do if Liberty 3 Pro disconnects or the sound is choppy?
      Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:

      1) Ensure your phone is on the right hand side of your body.

      2) Download videos and songs instead of streaming.

      3) If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.


      Or you can try:

      - Resetting the earbuds. See "How do I reset Liberty 3 Pro ?"

      - Try a different device if possible.
    • What should I do if any of the following problems occur? 1) The earbuds don’t recharge in the charging case. 2) The earbuds keep connecting to the device even after being put back in the charging case with the cover closed. 3) The earbuds don't turn on when taken out of the charging case.
      1) Confirm the charging case has power left (press the button on the case and see if a LED is illuminated).

      2) Clean the charging pins with a dry cloth and an alcohol-based disinfectant to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case correctly. When you put the earbuds back into the charging case, the lights inside the case will flash to indicate both earbuds are charging normally.

      3) Please make sure the earwings are installed well(Align the oval hole on the ear wing with the wearing detection sensor on the earbud.) so they didn't affect the charging.

      4) If they still do not turn on, put the earbuds back into the charging case and close the case for 6 seconds, and then open the case again.
    • How long does it take to fully charge the earbuds?
      About 2 hours.
    • How long does it take to fully charge the charging case?
      About 4 hours by wireless charger and about 3 hours by USB-C cable.
    • What is Liberty 3 Pro's playtime from a single charge/with the charging case?
      Normal Mode: Up to 8 hours on a single charge/32 hours with the charging case.

      Noise Cancelling Mode: Up to 6 hours on a single charge/24 hours with charging case.

      Transparency Mode: Up to 6 hours on a single charge/24 hours with charging case.

      Call: Up to 4.5 hours on a single charge/18 hours with charging case.

      Data based on internal lab testing. Results may vary under different conditions.
    • Does the case support wireless charging?
      Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned. If it starts charging you will see the LEDs blinking.
    • What audio codecs do Liberty 3 Pro support?
      SBC, AAC, and LDAC.
    • How do I enable LDAC?
      1) Download and update your soundcore app to latest version.

      2. Change the Sound Mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC-compatible device.
      Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime.
      Only devices with Android 8.0 or later support LDAC.
    • How do I enable 3D Surround Sound?
      Use the soundcore app to activate 3D Surround Sound. Go to the "Sound Mode" section to switch to 3D Surround Sound.

      Note: 3D Surround Sound processes audio data in real time, increasing the power consumption and decreasing the overall playtime.
    • What should I do if Liberty 3 Pro's noise cancellation performance does not meet my expectations?
      Here are some tips for enhancing the sound quality and noise cancellation:

      1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.

      2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.

      3) Take the HearID ANC test to personalize the noise cancelling effect.

      Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.

      4) Try different ANC modes to see which one suits your environment best.
    • What should I do if I encounter wind noise while outdoors?
      Use Wind Reduction mode, which can be found in the ANC section of the soundcore app. Wind Reduction mode is ideal for environments with constantly high levels of wind, such as cycling, workouts or other outdoor activities. When using this mode, the earbuds will detect wind noise automatically and when it reaches the threshold, Wind Reduction mode starts to work.
    • Firmware version x.82
      Performance improvements:

      -Improved stability of the Bluetooth connection

      Release Date: 05/07/2022
    • Firmware Version 3.71
      Added ANC/Transparency in Mono mode (requires soundcore App version 2.8.6 or higher to use).

      Release Date: 12/08/2021
    • Firmware version x.69
      Performance improvements and bug fixes:

      - Improved usability of touch controls

      - AAC/SBC codec audio lag has been reduced

      - Improved stability of LDAC mode when playing music

      Release Date: 11/20/2021
    • Firmware version x.58
      Performance improvements

      - Improved transparency

      - Improved call quality for loud, noisy environments

      - Improved power management

      Release Date: 11/04/2021
    • Are there any tips for upgrading Liberty 3 Pro's firmware?
      - Keep the earbuds in the charging case and ensure the cover is open.

      - Make sure the earbuds have enough power (over 20%).

      - Do not use the earbuds during the whole process.

      - Try again if it fails.
    • Manual

      A3952 - manual

      2021-3-30

    • QSG

      A3952 - QSG

      2022-3-30

    • Declaration of Conformity

      A3952-DOC

      2022-10-26

  • Presenting ACAA 2.0, the latest version of our revolutionary audio technology.
    Please select your ear tips and start listening.

    01

    Select ear tips and ear wings in a suitable size for your ears

    02

    Hold the buds in this position

    03

    Put buds in your ears at this angle

    04

    Twist to lock into place

  • How do I wear Liberty 3 Pro?
    1) Liberty 3 Pro comes with 4 sizes of ear wings and ear tips. The sizes are: XS(0), S(1), M(2), L(3), and the earbuds come with M(2) ear wings already attached.
    2) Select and install the ear tips before using for the first time. We recommend starting with size M(2).
    3) Put Liberty 3 Pro in your ears and twist to lock into place. Make sure the ear wings are wedged into the ridge of your ear.
    4) Try on different sizes of ear tips and ear wings until you find a combination which delivers a tight seal and snug fit. You may want to use different sizes of ear tips and ear wings in your left and right ears.
    5) If you're still not sure about the fit, take the Fit Test in the soundcore app.
  • Can I use Liberty 3 Pro without ear wings?
    We recommend using ear wings to get the best support and most stable fit. Try using the XS(0) size if the other sizes are all too large.
  • What is the black oval on Liberty 3 Pro's earbuds?
    They are the IR-sensors which sense if the earbuds are currently being worn. If the ear wings are installed incorrectly, the sensor will be covered and it will affect the accuracy of wearing detection. Make sure the ear wings are installed correctly and the surface of the IR-sensors is kept clean.
  • How does the automatic play/pause feature work?
    - Remove one bud to auto pause your media, replace the bud to resume playback.
    - Remove two buds to stop your media, and resume playback on your phone manually.
    - Auto play/pause may not be compatible with some 3rd party apps.
    - You can use the soundcore app to disable the auto play/pause feature.
  • How do I power the earbuds on and off?
    Power on:
    - The earbuds will turn on automatically when you open the charging case.
    - Or long press the touch pad to turn on the earbuds.
    Power off:
    - Put the earbuds back into the charging case and close the cover to turn off the earbuds.
    - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)
    - When you are wearing the earbuds, they will only turn off when the battery runs out.
  • Can I use the left/right earbud on its own?
    Yes, just take one earbud out from the charging case to use.
    If you are using two earbuds, you can put the earbud you don't want to use in the charging case and continue using the other one on its own.
    Note: If you are wearing two earbuds, listening in ANC mode, and you return one earbud to the charging case, ANC will switch to Normal mode automatically because it is not supported. If you wear the second earbud, Normal mode will switch back to ANC automatically.
  • How do I clean Liberty 3 Pro?
    - To clean the contact pins on both the earbuds and charging case, unplug the charging case from the power, use a cotton swab or cloth dipped in rubbing alcohol, or an alcohol wipe.
    - To clean the filter of the earbuds, remove the ear tips first and use a cotton swab dipped in rubbing alcohol to clean.
  • How can I adjust Liberty 3 Pro's volume via the earbuds?
    1) Go to the Apple App Store or Google Play to download the soundcore app.
    2) Pair your device with Liberty 3 Pro.
    3) Open the soundcore app to connect with Liberty 3 Pro.
    4) Select "Controls".
    5) Customize the controls according to your preferences.
    Note: Customized controls are not available when using a single earbud.
  • What do the LED indicators inside the case mean?
    Pulsing White: The earbuds are connected via Bluetooth and the pins are connected with the charging case.
    Flashing White: The earbuds are in pairing mode.
    Rapid Flash 3 Times: The earbuds are resetting.
    No Light: The earbuds have not connected correctly with the charging case, or the case has run out of battery.
  • How do I switch between ANC and Transparency modes?
    Long press the left/right earbud to switch between ANC and Transparency modes.
    To customize any touch control, download the soundcore app and go to "Controls".
  • How do I set up HearID ANC?
    Take the HearID ANC test in the app. It needs to be conducted in a noisy environment to ensure the best results.
    Tips:
    - Do not play music while taking the test as it will affect the accuracy of the result.
    - Do not swallow or talk during the test.
    - External noises need to of a stable level because large fluctuations in noise will affect the accuracy of the results.
  • How do I trigger my phone's voice assistant via Liberty 3 Pro?
    Go to "Controls" in the soundcore app, and choose a custom command for voice assistants.
  • What should I do if I have any problems using the touch controls?
    1) Make sure you are wearing the earbuds correctly.
    2) Try single press, double press, long-press, etc. to see if any of the commands work.
    3) Reset the earbuds. See "How do I reset Liberty 3 Pro ?" under the Bluetooth tab.
  • How should I look after Liberty 3 Pro?
    1) Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Liberty 3 Pro at least once a month.
    2) Charge the earbuds after you use them. In order to improve the battery's lifespan, do not always wait until there's 20% power remaining or less to charge them.
    3) If you are storing the charging case, make sure there are at least 2 lights lit up on the case to ensure there is enough power.
    4) Open the charging case's lid at least once a month to ensure the earbuds start charging.
    5) Regularly clean the charging pins on the earbuds and charging case.
    6) Keep the ear tips clean.
    7) If it comes into contact with liquid, use a hairdryer on the 'cool' setting to dry the case.
  • How do I enable multipoint connection on Liberty 3 Pro?
    Open the charging case lid so the earbuds enter pairing mode. Pair the earbuds with the first device, wear the earbuds, and then use one of the following methods to pair the second device:
    Method 1: Long press both touch pads for 5 seconds until you hear a tone to indicate the earbuds are in pairing mode. Search for soundcore Liberty 3 Pro in the second device's Bluetooth menu and pair.
    Method 2: Use the Bluetooth manager in the soundcore app to pair a second device or connect to paired device. Notes:
    1) To switch between media, you should stop the playing media on the first device, then start playing on the second.
    2) The media you're currently listening to will automatically stop when an incoming call is detected. 3) You can turn off the multipoint connection via the soundcore app.
    4) LDAC mode is disabled when using multipoint connection because of the Bluetooth transmission limit.
  • How do I reset Liberty 3 Pro?
    1) Place the earbuds in the charging case and leave the cover open.
    2) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly. When the LEDs start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
  • What should I do if any of the following problems occur? 1. Only one earbud has sound. 2. One side does not pair with the other side or my device. 3. No music plays after connecting with my device. 4. Cannot pair or reconnect with my device.
    Put the earbuds into the charging case and close for 10 seconds. Then open the case to try pairing again.
    If that doesn't work, try the following:
    1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.
    2) Place the earbuds in the charging case and leave the cover open.
    3) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly.
    When they start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
    4) Turn off your device's Bluetooth and turn it on again to pair with soundcore Liberty 3 Pro.
  • What should I do if Liberty 3 Pro disconnects or the sound is choppy?
    Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:
    1) Ensure your phone is on the right hand side of your body.
    2) Download videos and songs instead of streaming.
    3) If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.
    Or you can try:
    - Resetting the earbuds. See "How do I reset Liberty 3 Pro ?"
    - Try a different device if possible.
  • What should I do if any of the following problems occur? 1) The earbuds don’t recharge in the charging case. 2) The earbuds keep connecting to the device even after being put back in the charging case with the cover closed. 3) The earbuds don't turn on when taken out of the charging case.
    1) Confirm the charging case has power left (press the button on the case and see if a LED is illuminated).
    2) Clean the charging pins with a dry cloth and an alcohol-based disinfectant to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case correctly. When you put the earbuds back into the charging case, the lights inside the case will flash to indicate both earbuds are charging normally.
    3) Please make sure the earwings are installed well(Align the oval hole on the ear wing with the wearing detection sensor on the earbud.) so they didn't affect the charging.
    4) If they still do not turn on, put the earbuds back into the charging case and close the case for 6 seconds, and then open the case again.
  • How long does it take to fully charge the earbuds?
    About 2 hours.
  • How long does it take to fully charge the charging case?
    About 4 hours by wireless charger and about 3 hours by USB-C cable.
  • What is Liberty 3 Pro's playtime from a single charge/with the charging case?
    Normal Mode: Up to 8 hours on a single charge/32 hours with the charging case.
    Noise Cancelling Mode: Up to 6 hours on a single charge/24 hours with charging case.
    Transparency Mode: Up to 6 hours on a single charge/24 hours with charging case.
    Call: Up to 4.5 hours on a single charge/18 hours with charging case.
    Data based on internal lab testing. Results may vary under different conditions.
  • Does the case support wireless charging?
    Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned. If it starts charging you will see the LEDs blinking.
  • What audio codecs do Liberty 3 Pro support?
    SBC, AAC, and LDAC.
  • How do I enable LDAC?
    1) Download and update your soundcore app to latest version.
    2. Change the Sound Mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC-compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.
  • How do I enable 3D Surround Sound?
    Use the soundcore app to activate 3D Surround Sound. Go to the "Sound Mode" section to switch to 3D Surround Sound.
    Note: 3D Surround Sound processes audio data in real time, increasing the power consumption and decreasing the overall playtime.
  • What should I do if Liberty 3 Pro's noise cancellation performance does not meet my expectations?
    Here are some tips for enhancing the sound quality and noise cancellation:
    1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.
    2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.
    3) Take the HearID ANC test to personalize the noise cancelling effect.
    Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
    4) Try different ANC modes to see which one suits your environment best.
  • What should I do if I encounter wind noise while outdoors?
    Use Wind Reduction mode, which can be found in the ANC section of the soundcore app. Wind Reduction mode is ideal for environments with constantly high levels of wind, such as cycling, workouts or other outdoor activities. When using this mode, the earbuds will detect wind noise automatically and when it reaches the threshold, Wind Reduction mode starts to work.
  • Firmware version x.82
    Performance improvements:
    -Improved stability of the Bluetooth connection
    Release Date: 05/07/2022
  • Firmware Version 3.71
    Added ANC/Transparency in Mono mode (requires soundcore App version 2.8.6 or higher to use).
    Release Date: 12/08/2021
  • Firmware version x.69
    Performance improvements and bug fixes:
    - Improved usability of touch controls
    - AAC/SBC codec audio lag has been reduced
    - Improved stability of LDAC mode when playing music
    Release Date: 11/20/2021
  • Firmware version x.58
    Performance improvements
    - Improved transparency
    - Improved call quality for loud, noisy environments
    - Improved power management
    Release Date: 11/04/2021
  • Are there any tips for upgrading Liberty 3 Pro's firmware?
    - Keep the earbuds in the charging case and ensure the cover is open.
    - Make sure the earbuds have enough power (over 20%).
    - Do not use the earbuds during the whole process.
    - Try again if it fails.
  • Manual

    A3952 - manual

    2021-3-30

  • QSG

    A3952 - QSG

    2022-3-30

  • Declaration of Conformity

    A3952-DOC

    2022-10-26

    • Presenting ACAA 2.0, the latest version of our revolutionary audio technology.
      Please select your ear tips and start listening.

      01

      Select ear tips and ear wings in a suitable size for your ears

      02

      Hold the buds in this position

      03

      Put buds in your ears at this angle

      04

      Twist to lock into place

    • How do I wear Liberty 3 Pro?
      1) Liberty 3 Pro comes with 4 sizes of ear wings and ear tips. The sizes are: XS(0), S(1), M(2), L(3), and the earbuds come with M(2) ear wings already attached.

      2) Select and install the ear tips before using for the first time. We recommend starting with size M(2).

      3) Put Liberty 3 Pro in your ears and twist to lock into place. Make sure the ear wings are wedged into the ridge of your ear.

      4) Try on different sizes of ear tips and ear wings until you find a combination which delivers a tight seal and snug fit. You may want to use different sizes of ear tips and ear wings in your left and right ears.

      5) If you're still not sure about the fit, take the Fit Test in the soundcore app.
    • Can I use Liberty 3 Pro without ear wings?
      We recommend using ear wings to get the best support and most stable fit. Try using the XS(0) size if the other sizes are all too large.
    • What is the black oval on Liberty 3 Pro's earbuds?
      They are the IR-sensors which sense if the earbuds are currently being worn. If the ear wings are installed incorrectly, the sensor will be covered and it will affect the accuracy of wearing detection. Make sure the ear wings are installed correctly and the surface of the IR-sensors is kept clean.
    • How does the automatic play/pause feature work?
      - Remove one bud to auto pause your media, replace the bud to resume playback.

      - Remove two buds to stop your media, and resume playback on your phone manually.

      - Auto play/pause may not be compatible with some 3rd party apps.

      - You can use the soundcore app to disable the auto play/pause feature.
    • How do I power the earbuds on and off?
      Power on:

      - The earbuds will turn on automatically when you open the charging case.

      - Or long press the touch pad to turn on the earbuds.

      Power off:

      - Put the earbuds back into the charging case and close the cover to turn off the earbuds.

      - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)

      - When you are wearing the earbuds, they will only turn off when the battery runs out.
    • Can I use the left/right earbud on its own?
      Yes, just take one earbud out from the charging case to use.

      If you are using two earbuds, you can put the earbud you don't want to use in the charging case and continue using the other one on its own.


      Note: If you are wearing two earbuds, listening in ANC mode, and you return one earbud to the charging case, ANC will switch to Normal mode automatically because it is not supported. If you wear the second earbud, Normal mode will switch back to ANC automatically.
    • How do I clean Liberty 3 Pro?
      - To clean the contact pins on both the earbuds and charging case, unplug the charging case from the power, use a cotton swab or cloth dipped in rubbing alcohol, or an alcohol wipe.

      - To clean the filter of the earbuds, remove the ear tips first and use a cotton swab dipped in rubbing alcohol to clean.
    • How can I adjust Liberty 3 Pro's volume via the earbuds?
      1) Go to the Apple App Store or Google Play to download the soundcore app.

      2) Pair your device with Liberty 3 Pro.

      3) Open the soundcore app to connect with Liberty 3 Pro.

      4) Select "Controls".

      5) Customize the controls according to your preferences.


      Note: Customized controls are not available when using a single earbud.
    • What do the LED indicators inside the case mean?
      Pulsing White: The earbuds are connected via Bluetooth and the pins are connected with the charging case.

      Flashing White: The earbuds are in pairing mode.

      Rapid Flash 3 Times: The earbuds are resetting.

      No Light: The earbuds have not connected correctly with the charging case, or the case has run out of battery.
    • How do I switch between ANC and Transparency modes?
      Long press the left/right earbud to switch between ANC and Transparency modes.

      To customize any touch control, download the soundcore app and go to "Controls".
    • How do I set up HearID ANC?
      Take the HearID ANC test in the app. It needs to be conducted in a noisy environment to ensure the best results.

      Tips:

      - Do not play music while taking the test as it will affect the accuracy of the result.

      - Do not swallow or talk during the test.

      - External noises need to of a stable level because large fluctuations in noise will affect the accuracy of the results.
    • How do I trigger my phone's voice assistant via Liberty 3 Pro?
      Go to "Controls" in the soundcore app, and choose a custom command for voice assistants.
    • What should I do if I have any problems using the touch controls?
      1) Make sure you are wearing the earbuds correctly.

      2) Try single press, double press, long-press, etc. to see if any of the commands work.

      3) Reset the earbuds. See "How do I reset Liberty 3 Pro ?" under the Bluetooth tab.
    • How should I look after Liberty 3 Pro?
      1) Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Liberty 3 Pro at least once a month.

      2) Charge the earbuds after you use them. In order to improve the battery's lifespan, do not always wait until there's 20% power remaining or less to charge them.

      3) If you are storing the charging case, make sure there are at least 2 lights lit up on the case to ensure there is enough power.

      4) Open the charging case's lid at least once a month to ensure the earbuds start charging.

      5) Regularly clean the charging pins on the earbuds and charging case.

      6) Keep the ear tips clean.

      7) If it comes into contact with liquid, use a hairdryer on the 'cool' setting to dry the case.
    • How do I enable multipoint connection on Liberty 3 Pro?
      Open the charging case lid so the earbuds enter pairing mode. Pair the earbuds with the first device, wear the earbuds, and then use one of the following methods to pair the second device:

      Method 1: Long press both touch pads for 5 seconds until you hear a tone to indicate the earbuds are in pairing mode. Search for soundcore Liberty 3 Pro in the second device's Bluetooth menu and pair.

      Method 2: Use the Bluetooth manager in the soundcore app to pair a second device or connect to paired device.

      Notes:

      1) To switch between media, you should stop the playing media on the first device, then start playing on the second.

      2) The media you're currently listening to will automatically stop when an incoming call is detected.
      3) You can turn off the multipoint connection via the soundcore app.

      4) LDAC mode is disabled when using multipoint connection because of the Bluetooth transmission limit.
    • How do I reset Liberty 3 Pro?
      1) Place the earbuds in the charging case and leave the cover open.

      2) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly. When the LEDs start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.
    • What should I do if any of the following problems occur? 1. Only one earbud has sound. 2. One side does not pair with the other side or my device. 3. No music plays after connecting with my device. 4. Cannot pair or reconnect with my device.
      Put the earbuds into the charging case and close for 10 seconds. Then open the case to try pairing again.


      If that doesn't work, try the following:

      1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.

      2) Place the earbuds in the charging case and leave the cover open.

      3) Press and hold the button on the case for 10 seconds until the LED indicators inside flash 3 times quickly.
      When they start flashing fast, it confirms that the reset was successful and the earbuds have entered pairing mode.

      4) Turn off your device's Bluetooth and turn it on again to pair with soundcore Liberty 3 Pro.
    • What should I do if Liberty 3 Pro disconnects or the sound is choppy?
      Some environments (such as airports, offices, crowded public spaces etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:

      1) Ensure your phone is on the right hand side of your body.

      2) Download videos and songs instead of streaming.

      3) If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.


      Or you can try:

      - Resetting the earbuds. See "How do I reset Liberty 3 Pro ?"

      - Try a different device if possible.
    • What should I do if any of the following problems occur? 1) The earbuds don’t recharge in the charging case. 2) The earbuds keep connecting to the device even after being put back in the charging case with the cover closed. 3) The earbuds don't turn on when taken out of the charging case.
      1) Confirm the charging case has power left (press the button on the case and see if a LED is illuminated).

      2) Clean the charging pins with a dry cloth and an alcohol-based disinfectant to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case correctly. When you put the earbuds back into the charging case, the lights inside the case will flash to indicate both earbuds are charging normally.

      3) Please make sure the earwings are installed well(Align the oval hole on the ear wing with the wearing detection sensor on the earbud.) so they didn't affect the charging.

      4) If they still do not turn on, put the earbuds back into the charging case and close the case for 6 seconds, and then open the case again.
    • How long does it take to fully charge the earbuds?
      About 2 hours.
    • How long does it take to fully charge the charging case?
      About 4 hours by wireless charger and about 3 hours by USB-C cable.
    • What is Liberty 3 Pro's playtime from a single charge/with the charging case?
      Normal Mode: Up to 8 hours on a single charge/32 hours with the charging case.

      Noise Cancelling Mode: Up to 6 hours on a single charge/24 hours with charging case.

      Transparency Mode: Up to 6 hours on a single charge/24 hours with charging case.

      Call: Up to 4.5 hours on a single charge/18 hours with charging case.

      Data based on internal lab testing. Results may vary under different conditions.
    • Does the case support wireless charging?
      Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned. If it starts charging you will see the LEDs blinking.
    • What audio codecs do Liberty 3 Pro support?
      SBC, AAC, and LDAC.
    • How do I enable LDAC?
      1) Download and update your soundcore app to latest version.

      2. Change the Sound Mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC-compatible device.
      Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime.
      Only devices with Android 8.0 or later support LDAC.
    • How do I enable 3D Surround Sound?
      Use the soundcore app to activate 3D Surround Sound. Go to the "Sound Mode" section to switch to 3D Surround Sound.

      Note: 3D Surround Sound processes audio data in real time, increasing the power consumption and decreasing the overall playtime.
    • What should I do if Liberty 3 Pro's noise cancellation performance does not meet my expectations?
      Here are some tips for enhancing the sound quality and noise cancellation:

      1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.

      2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.

      3) Take the HearID ANC test to personalize the noise cancelling effect.

      Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.

      4) Try different ANC modes to see which one suits your environment best.
    • What should I do if I encounter wind noise while outdoors?
      Use Wind Reduction mode, which can be found in the ANC section of the soundcore app. Wind Reduction mode is ideal for environments with constantly high levels of wind, such as cycling, workouts or other outdoor activities. When using this mode, the earbuds will detect wind noise automatically and when it reaches the threshold, Wind Reduction mode starts to work.
    • Firmware version x.82
      Performance improvements:

      -Improved stability of the Bluetooth connection

      Release Date: 05/07/2022
    • Firmware Version 3.71
      Added ANC/Transparency in Mono mode (requires soundcore App version 2.8.6 or higher to use).

      Release Date: 12/08/2021
    • Firmware version x.69
      Performance improvements and bug fixes:

      - Improved usability of touch controls

      - AAC/SBC codec audio lag has been reduced

      - Improved stability of LDAC mode when playing music

      Release Date: 11/20/2021
    • Firmware version x.58
      Performance improvements

      - Improved transparency

      - Improved call quality for loud, noisy environments

      - Improved power management

      Release Date: 11/04/2021
    • Are there any tips for upgrading Liberty 3 Pro's firmware?
      - Keep the earbuds in the charging case and ensure the cover is open.

      - Make sure the earbuds have enough power (over 20%).

      - Do not use the earbuds during the whole process.

      - Try again if it fails.
    • Manual

      A3952 - manual

      2021-3-30

    • QSG

      A3952 - QSG

      2022-3-30

    • Declaration of Conformity

      A3952-DOC

      2022-10-26

 

 

Customer Reviews

Based on 590 reviews
74%
(435)
26%
(155)
0%
(0)
0%
(0)
0%
(0)
d
dvinchi
Expected more...

>> Very good ANC and phone app, but worse sound than my cheaper QCY HT07.>> Good case size, but poor case layout (difficult to get in and out)

G
Ghino
large speakers in your ears

These buds are amazing. They come with tons of tips to your liking and there's no excuse for not getting the custom fit or sound. Your can do so much in the app to enhance the sound quality and performance. The sound is really amazing. They really sound like the Soundcore Space over the ear. I would recommend these any day.

G
Ghino
large speakers in your ears

These buds are amazing. They come with tons of tips to your liking and there's no excuse for not getting the custom fit or sound. Your can do so much in the app to enhance the sound quality and performance. The sound is really amazing. They really sound like the Soundcore Space over the ear. I would recommend these any day.

G
Ghino
large speakers in your ears

These buds are amazing. They come with tons of tips to your liking and there's no excuse for not getting the custom fit or sound. Your can do so much in the app to enhance the sound quality and performance. The sound is really amazing. They really sound like the Soundcore Space over the ear. I would recommend these any day.

C
Chance

read a bunch of reviews before purchasing and my optionion lines up with those reviews. amazing sound and build quality only thing is if you cant find the right combo of ear tips and wings there gonna feel super uncomforable and fatiguing after a while but once i found the right combo they were amazing. listening to 8-10 hours at a time and have no issues. battery lasts about 4-8 hrs continous depending on volume and temperature but with the case and swapping inbetween it isnt an issue for me

You may also like

Sign In to Receive
the Coupon Below
*Sorry, your account contains sensitive data. Please verify your account by email. Send again Send again in seconds
Register
Already signed up? Sign in Now
Sign In to soundcore
Quick Sign In
Sign In with Password
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Sign In to soundcore
Email address
Password
Forget password?
Send again Send again in seconds
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
Welcome to the soundcore Collective
Here's your coupon
  • %
    Off
    Code: COPY

1. Your initial password and coupon have been sent to your email address.

2. Verify your email address for account security and credit distribution.Send again Send again in seconds

OK,Get it
Registration Failed
Sorry, your link is not working, please register again!
OK
Enter your phone number to subscribe to SMS alerts.
By subscribing, you agree to receive recurring automated promotional and personalized marketing text messages and phone calls from soundcore at the provided phone number. Consent is not a condition of any purchase. Reply HELP for help and STOP to unsubscribe. Message frequency will vary. Message and data rates may apply. View Terms & Privacy.
Mobile Number
*There seems to be something wrong.
The interface returns failure and will be skipped after 5 seconds.
Subscribe
Skip