Motion 300 | Portable Bluetooth Speaker
$109.99
Motion 300 | Portable Bluetooth Speaker

Unboxing and Reviews

Listen to what these YouTubers had to say about Motion 300.
image
play
avatar

New Stuff TV

148K subscribers
image
play
avatar

TechMagnet

447k subscribers
image
play
avatar

Smart Home Sounds

103k subscribers
image
play
avatar

Patrick Rambles

119k subscribers

Premium Comparison Table

Soundcore Motion 300
Soundcore Motion+
Soundcore Motion X600
Soundcore Motion Boom
Motion Boom plus
Powerful Bass with BassUp
Hi-Res Wireless Hi-res Hi-Res Wireless Hi-res
SmartTune Auto adaptive EQ
Sound High-Fidelity Stereo Sound High-Fidelity Stereo Sound High-Fidelity Spatial Sound Stereo Sound with Bass Huge Stereo with deep bass
Output Power 30W 30W 50W 30W 80W
Playtime 13 Hours 12 Hours 12 Hours 24 Hours 20 Hours
Aux in
Multi-Speaker TWS TWS TWS TWS TWS PartyCast 2.0
Water Resistance Waterproof (IPX7) Waterproof (IPX7) Waterproof (IPX7) Waterproof (IPX7) Waterproof & Dustproof (IP67)
Soundcore App Customizable Pro EQ Customizable EQ Customizable Pro EQ Customizable EQ Customizable EQ
Recommended For Indoor Camping Picnic Indoor Bedroom Living Room Indoor Bedroom Living Room Boat Beach Camping Picnic Boat Beach Camping Picnic

FAQ

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

Customer Reviews

Based on 15 reviews
87%
(13)
7%
(1)
0%
(0)
7%
(1)
0%
(0)
I
I. Anderson
Great Sound for a Great Price

Picked this up on sale and have not been disappointed. Audio sounds clear whether I'm next to it with the volume low or working outdoors with it loud. Recommended if you want great audio quality and portability.

1
1988

Love it!

P
Paul Webb
Good sound from a small waterproof speaker

Good sound and decent volume. Can chain together with other speakers. Rechargeable battery.

S
SeaBreez
Great Speaker

The EQ could be better but overall it’s still great.Would prefer slider controls for bass, mid-range and treble, nice and simple.Build quality is A1.Sound quality is there if you wish to play with their EQ.Good buy, especially on sale.

P
Perfect Patrick
Generally good sound but poor bass

I'm generally happy with my purchase of this speaker. The sound is a step up from the cheaper speakers I have owned.The main problem is the quality of the bass. Any bass whether is from a drum, a string base, or anything just sounds like thumps. I use an equalizer to reduce frequencies around 60 Hz to make it less annoying.The speaker is also quite heavy. It's not something I would pack for a trip or take on a picnic.

You may also like

Sign In to Receive
the Coupon Below
*Sorry, your account contains sensitive data. Please verify your account by email. Send again Send again in seconds
Register
Already signed up? Sign in Now
Sign In to soundcore
Quick Sign In
Sign In with Password
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Sign In to soundcore
Email address
Password
Forget password?
Send again Send again in seconds
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
Welcome to the soundcore Collective
Here's your coupon
  • %
    Off
    Code: COPY

1. Your initial password and coupon have been sent to your email address.

2. Verify your email address for account security and credit distribution.Send again Send again in seconds

OK,Get it
Registration Failed
Sorry, your link is not working, please register again!
OK
Enter your phone number to subscribe to SMS alerts.
By subscribing, you agree to receive recurring automated promotional and personalized marketing text messages and phone calls from soundcore at the provided phone number. Consent is not a condition of any purchase. Reply HELP for help and STOP to unsubscribe. Message frequency will vary. Message and data rates may apply. View Terms & Privacy.
Mobile Number
*There seems to be something wrong.
The interface returns failure and will be skipped after 5 seconds.
Subscribe
Skip