Motion X600 | High-Quality Sound Wireless Speaker
Sold Out
Motion X600 | High-Quality Sound Wireless Speaker
poster
Spatial Audio Fully Water Proff AUX in Hi-Res Portable 3 Colors 50W Powerful Sound
Spatial Audio Fully Water Proff AUX in Hi-Res Portable 3 Colors 50W Powerful Sound

FAQ

  • What's in the box?
    Motion X600 Speaker
    60 cm USB-C to C Cable
    Safety Card
    Quick Start Guide

    Note: Aux cable and wall charger are not included!
  • How long does it take to charge Motion X600?
    It takes around 6 hours to charge with a certified 5V/3A wall charger.
  • How do I reset Motion X600?
    Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
  • Is Motion X600 waterproof?
    Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • Does Motion X600 have a built-in microphone?
    Yes.
  • Can I get stereo sound when using one Motion X600?
    Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
  • Why is the battery life less than 12 hours?
    12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
  • Where can I download the soundcore app?
    Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

    1. Customizable EQ
    Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

    2. LDAC Mode
    Use the app to switch to LDAC mode (only available on Android 8.0 and above).
  • How do I turn off Motion X600's voice prompts?
    1. Connect your device to Motion X600.
    2. Download and open the soundcore app.
    3. Press the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I update Motion X600's firmware?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app, then press Update Firmware.
    3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
    4. Motion X600 will restart automatically after updating successfully.
  • Does spatial audio require a specific music format?
    No.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

    Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
  • How do I use LDAC?
    On a device powered by Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to the Settings
    3. Click on Sound Mode
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
    • LDAC provides higher quality sound but increases power consumption and reduces playtime.
    • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • Why do some devices experience interrupted sound when using the LDAC function?
    After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

    If you would like to select 990 kbps LDAC, we recommend following these steps:

    1. Turn off Wi-Fi on your Android device.
    2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
    3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
    4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
    5. Play local music files.
  • How can I TWS pair two Motion X600 speakers at the same time?
    Method 1.
    1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2.
    1. Long press the power button to start both speakers
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

    Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
  • I can't detect Motion X600 via Bluetooth. What should I do?
    1. Fully charge the speaker.
    2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    3. Turn your device and your device's Bluetooth off and on.
    4. Clear all pairing records on your device.
    5. Restart your speaker and reconnect to it.
    6. Try the speaker with different devices if possible.
  • How do I use the EQ?
    Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
  • Can I increase the bass on my Motion X600?
    You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
  • How can I share a custom EQ?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app.
    3. Click Equalizer.
    4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

    Note: To use the sharing function, you need to log in to your soundcore account first.
  • How do I import a custom EQ that someone has shared with me?
    Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
    Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
    Click "Yes" and then click "Import".

    Method 2: Scan the QR Code
    Open the soundcore app and pair with Motion X600.
    Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
  • QSG

    A3130-QSG

    2023-05-08

  • Manual

    A3130-Manual

    2023-05-08

    • What's in the box?
      Motion X600 Speaker
      60 cm USB-C to C Cable
      Safety Card
      Quick Start Guide

      Note: Aux cable and wall charger are not included!
    • How long does it take to charge Motion X600?
      It takes around 6 hours to charge with a certified 5V/3A wall charger.
    • How do I reset Motion X600?
      Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    • Is Motion X600 waterproof?
      Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • Does Motion X600 have a built-in microphone?
      Yes.
    • Can I get stereo sound when using one Motion X600?
      Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
    • Why is the battery life less than 12 hours?
      12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Where can I download the soundcore app?
      Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

      1. Customizable EQ
      Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

      2. LDAC Mode
      Use the app to switch to LDAC mode (only available on Android 8.0 and above).
    • How do I turn off Motion X600's voice prompts?
      1. Connect your device to Motion X600.
      2. Download and open the soundcore app.
      3. Press the top right corner to access more options.
      4. Turn off voice prompts.
    • How do I update Motion X600's firmware?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app, then press Update Firmware.
      3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
      4. Motion X600 will restart automatically after updating successfully.
    • Does spatial audio require a specific music format?
      No.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

      Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
    • How do I use LDAC?
      On a device powered by Android 8.0 or above, do the following:
      1. Open the soundcore app.
      2. Go to the Settings
      3. Click on Sound Mode
      4. Select Preferred Audio Quality and switch to LDAC codec.

      Notes:
      • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
      • LDAC provides higher quality sound but increases power consumption and reduces playtime.
      • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • Why do some devices experience interrupted sound when using the LDAC function?
      After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

      If you would like to select 990 kbps LDAC, we recommend following these steps:

      1. Turn off Wi-Fi on your Android device.
      2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
      3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
      4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
      5. Play local music files.
    • How can I TWS pair two Motion X600 speakers at the same time?
      Method 1.
      1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
      2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
      3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
      5. The master speaker is the one with the blue light.
      6. Use the master speaker to pair with your device.

      Method 2.
      1. Long press the power button to start both speakers
      2. Connect either speaker with your Bluetooth device.
      3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

      Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
    • I can't detect Motion X600 via Bluetooth. What should I do?
      1. Fully charge the speaker.
      2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      3. Turn your device and your device's Bluetooth off and on.
      4. Clear all pairing records on your device.
      5. Restart your speaker and reconnect to it.
      6. Try the speaker with different devices if possible.
    • How do I use the EQ?
      Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
    • Can I increase the bass on my Motion X600?
      You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
    • How can I share a custom EQ?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app.
      3. Click Equalizer.
      4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

      Note: To use the sharing function, you need to log in to your soundcore account first.
    • How do I import a custom EQ that someone has shared with me?
      Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
      Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
      Click "Yes" and then click "Import".

      Method 2: Scan the QR Code
      Open the soundcore app and pair with Motion X600.
      Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
    • QSG

      A3130-QSG

      2023-05-08

    • Manual

      A3130-Manual

      2023-05-08

  • What's in the box?
    Motion X600 Speaker
    60 cm USB-C to C Cable
    Safety Card
    Quick Start Guide

    Note: Aux cable and wall charger are not included!
  • How long does it take to charge Motion X600?
    It takes around 6 hours to charge with a certified 5V/3A wall charger.
  • How do I reset Motion X600?
    Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
  • Is Motion X600 waterproof?
    Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • Does Motion X600 have a built-in microphone?
    Yes.
  • Can I get stereo sound when using one Motion X600?
    Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
  • Why is the battery life less than 12 hours?
    12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
  • Where can I download the soundcore app?
    Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

    1. Customizable EQ
    Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

    2. LDAC Mode
    Use the app to switch to LDAC mode (only available on Android 8.0 and above).
  • How do I turn off Motion X600's voice prompts?
    1. Connect your device to Motion X600.
    2. Download and open the soundcore app.
    3. Press the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I update Motion X600's firmware?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app, then press Update Firmware.
    3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
    4. Motion X600 will restart automatically after updating successfully.
  • Does spatial audio require a specific music format?
    No.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

    Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
  • How do I use LDAC?
    On a device powered by Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to the Settings
    3. Click on Sound Mode
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
    • LDAC provides higher quality sound but increases power consumption and reduces playtime.
    • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • Why do some devices experience interrupted sound when using the LDAC function?
    After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

    If you would like to select 990 kbps LDAC, we recommend following these steps:

    1. Turn off Wi-Fi on your Android device.
    2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
    3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
    4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
    5. Play local music files.
  • How can I TWS pair two Motion X600 speakers at the same time?
    Method 1.
    1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2.
    1. Long press the power button to start both speakers
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

    Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
  • I can't detect Motion X600 via Bluetooth. What should I do?
    1. Fully charge the speaker.
    2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    3. Turn your device and your device's Bluetooth off and on.
    4. Clear all pairing records on your device.
    5. Restart your speaker and reconnect to it.
    6. Try the speaker with different devices if possible.
  • How do I use the EQ?
    Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
  • Can I increase the bass on my Motion X600?
    You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
  • How can I share a custom EQ?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app.
    3. Click Equalizer.
    4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

    Note: To use the sharing function, you need to log in to your soundcore account first.
  • How do I import a custom EQ that someone has shared with me?
    Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
    Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
    Click "Yes" and then click "Import".

    Method 2: Scan the QR Code
    Open the soundcore app and pair with Motion X600.
    Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
  • QSG

    A3130-QSG

    2023-05-08

  • Manual

    A3130-Manual

    2023-05-08

    • What's in the box?
      Motion X600 Speaker
      60 cm USB-C to C Cable
      Safety Card
      Quick Start Guide

      Note: Aux cable and wall charger are not included!
    • How long does it take to charge Motion X600?
      It takes around 6 hours to charge with a certified 5V/3A wall charger.
    • How do I reset Motion X600?
      Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    • Is Motion X600 waterproof?
      Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • Does Motion X600 have a built-in microphone?
      Yes.
    • Can I get stereo sound when using one Motion X600?
      Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
    • Why is the battery life less than 12 hours?
      12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Where can I download the soundcore app?
      Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

      1. Customizable EQ
      Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

      2. LDAC Mode
      Use the app to switch to LDAC mode (only available on Android 8.0 and above).
    • How do I turn off Motion X600's voice prompts?
      1. Connect your device to Motion X600.
      2. Download and open the soundcore app.
      3. Press the top right corner to access more options.
      4. Turn off voice prompts.
    • How do I update Motion X600's firmware?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app, then press Update Firmware.
      3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
      4. Motion X600 will restart automatically after updating successfully.
    • Does spatial audio require a specific music format?
      No.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

      Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
    • How do I use LDAC?
      On a device powered by Android 8.0 or above, do the following:
      1. Open the soundcore app.
      2. Go to the Settings
      3. Click on Sound Mode
      4. Select Preferred Audio Quality and switch to LDAC codec.

      Notes:
      • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
      • LDAC provides higher quality sound but increases power consumption and reduces playtime.
      • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • Why do some devices experience interrupted sound when using the LDAC function?
      After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

      If you would like to select 990 kbps LDAC, we recommend following these steps:

      1. Turn off Wi-Fi on your Android device.
      2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
      3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
      4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
      5. Play local music files.
    • How can I TWS pair two Motion X600 speakers at the same time?
      Method 1.
      1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
      2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
      3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
      5. The master speaker is the one with the blue light.
      6. Use the master speaker to pair with your device.

      Method 2.
      1. Long press the power button to start both speakers
      2. Connect either speaker with your Bluetooth device.
      3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

      Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
    • I can't detect Motion X600 via Bluetooth. What should I do?
      1. Fully charge the speaker.
      2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      3. Turn your device and your device's Bluetooth off and on.
      4. Clear all pairing records on your device.
      5. Restart your speaker and reconnect to it.
      6. Try the speaker with different devices if possible.
    • How do I use the EQ?
      Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
    • Can I increase the bass on my Motion X600?
      You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
    • How can I share a custom EQ?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app.
      3. Click Equalizer.
      4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

      Note: To use the sharing function, you need to log in to your soundcore account first.
    • How do I import a custom EQ that someone has shared with me?
      Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
      Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
      Click "Yes" and then click "Import".

      Method 2: Scan the QR Code
      Open the soundcore app and pair with Motion X600.
      Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
    • QSG

      A3130-QSG

      2023-05-08

    • Manual

      A3130-Manual

      2023-05-08

Customer Reviews

Based on 466 reviews
89%
(413)
11%
(52)
0%
(1)
0%
(0)
0%
(0)
T
Tommy

Hear me out, if you love bass absolutely do not buy this speaker. This speaker has very little bass near zero in fact. So this is not for bass lover. BUT , the sound is very clear and detailed, for a speaker this size and prize. The spatial audio give the speaker a nice soundstage and a very clear audio experience. This speaker is obviously not for everyone but if you want a nice clear speaker go for it, but if you want to jam forget it.

C
Chuck
Very good sounding speaker

Maybe it's just me but I think there is too much hype over this x600. Oh it sounds amazing for it's size and the app is one of the best I've worked with. Build quality is superb. With spatial audio off it's just another boombox and an overpriced one at that. I've heard better for less Tribit makes excellent products. Spatial makes it beats all others. Not a gimmick...it actually creates a room filling hifi sound. Play hi res audio thru it and it's mind blowing. This can get real loud and I mean loud. Better than the Bose i've owned in all regards. The app allows custom audio settings so even the most fussiest people will find the sound they like. Instant bluetooth connect. Seriously this is a game changer in small BT speakers. The bass boost can be a little too much on certain music so I found myself keeping it off in the house in smaller rooms. Outside probably fine. The retail packaging alone is premium. You'd think it was a $1000 the way they packed it. Anker is good in that way. Make sure you charge to 100% before using it when it arrives. It took 3hrs for mine so it must come with a 50% charge. That is the one negative. Slow charge only. 5v 3amps is a joke. Fast charge is the new norm. I doubt 12hrs runtime is accurate unless you just leave it on with nothing connected to it. After a few hrs I decided to charge it and it took around 2hrs and I wasn't driving it hard. Of course there is no way of knowing the exact % of battery drain which is another negative. Even the app doesn't offer that info. Would have been nice to have a 100% to 0% gauge. Maybe next model will offer more features and better battery life. Slow charging is still ok planning use around that. I bought a padded case for it off of amazon. Got a refund and kept it because it was nothing like the ad stated. It's ok for storing it in to avoid dust etc but as far as other protection it offered minimal. Thin and cheap. So be careful which one you order. $29 is a joke dollarstore quality so was going to return it but told keep it and refunded. It's worth free. LOL Maybe there will be far better hardshell ones available or buy a case with removable foam inserts to custom fit it. Its worth protecting. 2 of these paired together would be amazing if you want mind blowing stereo. I might even invest in another if they go on sale again. It comes down do I recommend it. Oh yeah...no questions...it's that good. Don't expect too much from it and its great. They can only get so much from such a small speaker but it is stunning what Anker has done.

T
TBAYtech
Atmos no but Spatial YES!!

I own a Sonos era300 and it does a great job with true Dolby Atmos Spatial Audio but at $350 less the x600 really sounds awesome. Amazing stereo separation and the upward firing Mid adds some real height to the sound . I was really happy out of the box but I imported some eq profiles into the soundcore app and holy smokes. This really brought the speaker to another level! I can easily say this is by far the most impressive portable Bluetooth speaker I have owned. If all you want is Boom there are other choices but many are lacking upper range and Mid/vocals…. definitely does not mean this speaker doesn’t thump. It sounds amazing on every genre from dance, electronic, rock , blues ,reggae and everything in between. I also own a JBL boombox (2 nd edition) and it is an around 10db louder but has nowhere near the balance the x600 has. My JBL is going up for sale I think. Glad I took the chance! PS play with the EQ…you can build a bunch of them and they store on your soundcore profile so you can have the EQs available from one device to the other.

R
Rooster
A well made and sturdy speaker.

I works very well and can be adjusted using the app.

D
Derrick

Really great Product . Very happy with the sound that comes out of this small device.

Sign In to Receive
the Coupon Below
*Sorry, your account contains sensitive data. Please verify your account by email. Send again Send again in seconds
Register
Already signed up? Sign in Now
Sign In to soundcore
Quick Sign In
Sign In with Password
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Sign In to soundcore
Email address
Password
Forget password?
Send again Send again in seconds
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
Welcome to the soundcore Collective
Here's your coupon
  • %
    Off
    Code: COPY

1. Your initial password and coupon have been sent to your email address.

2. Verify your email address for account security and credit distribution.Send again Send again in seconds

OK,Get it
Registration Failed
Sorry, your link is not working, please register again!
OK
Enter your phone number to subscribe to SMS alerts.
By subscribing, you agree to receive recurring automated promotional and personalized marketing text messages and phone calls from soundcore at the provided phone number. Consent is not a condition of any purchase. Reply HELP for help and STOP to unsubscribe. Message frequency will vary. Message and data rates may apply. View Terms & Privacy.
Mobile Number
*There seems to be something wrong.
The interface returns failure and will be skipped after 5 seconds.
Subscribe
Skip